Date | City | State | Employer | Body Part | Event |
---|---|---|---|---|---|
2021-11-12 | Denver | Co | Kiewit Infrastructure | Fingertip(s) | Injured by slipping or swinging object held by injured worker |
An employee was using a circular saw to score 1/8 inch plywood. The saw blade amputated the tip of his left index finger. | |||||
2021-11-08 | Tulsa | Ok | Shielding Resources Group, Inc. | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting a two-by-four using a table saw. The employee used his left hand to guide the two-by-four through the saw when a kickback occurred, drawing the employee's hand into the saw blade and resulting in partial amputations of the index and ring fingers. | |||||
2021-11-08 | Atlanta | Ga | Against The Grain Tops, Co. | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was using a push stick to cut wood on a table saw when the push stick slipped and the saw blade contacted the employee's left thumb and index finger, resulting in amputations. | |||||
2021-10-26 | Vero Beach | Fl | Ridgeline Roofing | Arm(s) | Injured by slipping or swinging object held by injured worker |
An employee was using a side saw to remove rotten siding from a residential property when the saw blade bound and kicked back, hitting him in the left arm and causing lacerations. | |||||
2021-10-04 | Fort Lauderdale | Fl | INDUSTRIAL SHADEPORTS, INC. | Hand(s) | Caught in running equipment or machinery during maintenance, cleaning |
On October 4, 2021, an employee was trying to lubricate a bandsaw blade when it caught the oil container he was using. The blade then lacerated the top of his right hand. | |||||
2021-09-20 | Buckfield | Me | Turning Acquisitions, LLC | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was about to change a saw blade when the saw amputated two of the employee's fingers. | |||||
2021-09-07 | Reamstown | Pa | Boose Aluminum Foundry Company, Incorporated | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was using a saw to cut off a casting. The saw blade contacted the employee's left thumb, causing an amputation to the thumb. | |||||
2021-08-30 | Shrewsbury | Ma | Supercon, Incorporated | Fingertip(s) | Struck against moving part of machinery or equipment |
On August 30, 2021, an employee was operating a stationary electric bandsaw when the saw blade amputated the employee's fingertip. | |||||
2021-08-27 | Castle Rock | Co | Basic Drywall Inc. | Fingertip(s) | Injured by slipping or swinging object held by injured worker |
An employee was cutting a wall stud with a circular saw. The saw blade hit a knot in the wood; the saw kicked back and amputated the employee's left index fingertip at the first knuckle. | |||||
2021-08-17 | Mount Pleasant | Wi | Turn-Key Construction | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
A Turn-Key Construction employee was cutting aluminum trim with a saw blade. The trim snagged in the blade, pulling his finger toward it. The blade lacerated his finger to the bone. | |||||
2021-08-07 | Park Falls | Wi | Midwest Hardwoods Corporation | Fingertip(s) | Struck against moving part of machinery or equipment |
At about 2:15 a.m. on August 7, 2021, an employee was troubleshooting an overheating issue on a 56-inch circular saw. The saw was turned off. The teeth of the still moving saw blade made contact with the employee's left index finger, resulting in a fingertip amputation. The employee was hospitalized. | |||||
2021-08-05 | Millbury | Oh | Carter Lumber dba Carter Components | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was ripping plywood across a table saw. The saw blade cut the employee, resulting in the amputation of the employee's left middle and ring fingers. | |||||
2021-07-26 | Gibbon | Ne | Gibbon Packing, LLC | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was cutting beef with a meat saw when his right thumb contacted the saw blade, resulting in a fingertip amputation. | |||||
2021-07-21 | Keene | Nh | DEW Construction | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting a 2 x 4 on edge using a table saw. The push stick he was using broke and his left thumb slipped into the saw blade. Three-quarters of the thumb was amputated. | |||||
2021-07-06 | Aurora | Co | Lowes Home Centers, LLC | Finger(s), fingernail(s) | Injured by slipping or swinging object held by injured worker |
An employee was using a circular saw to cut a 4x4 post when the saw blade contacted his left middle finger, resulting in an amputation of approximately 40% of the finger. | |||||
2021-06-28 | Two Rivers | Wi | Eggers Industries, Inc. | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
On June 28, 2021, at 8:45 a.m., an employee went to dislodge a door from a double-end trim saw when his hand contacted the saw blade. The employee suffered a partial amputation of the right index finger down to the top knuckle, as well as lacerations to two adjacent fingers, | |||||
2021-06-22 | Rosharon | Tx | Mammoet | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was measuring a bar stock to be cut. A chop saw blade amputated the employee's left thumb. | |||||
2021-06-18 | Springfield | Oh | Fire and Marine, Inc. | Finger(s), fingernail(s) | Struck by dislodged flying object, particle |
An employee was operating a chop saw when the saw blade bounded with the material being cut, causing the material to flip and contact the employee's left middle finger. The employee suffered an open fracture and the amputation of a finger on their left hand. | |||||
2021-06-08 | West Allis | Wi | Blast Cleaning Technologies | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was using a vertical band saw to cut metal tubing. As the employee was wiping down the metal tube with a rag, his hand contacted the saw blade resulting in a fingertip amputation. | |||||
2021-06-04 | Riverton | Wv | Allegheny Wood Products, Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was clearing a jam on a board edger when their right index finger was struck by a saw blade, resulting in amputation at the second knuckle. | |||||
2021-05-20 | Reading | Pa | CRAFT-MAID KITCHENS, INCORPORATED | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting wood on a table saw when the wood kicked back and knocked the employee's hand into the saw blade. The employee suffered a severe laceration to the left hand and an amputation to the left index finger. | |||||
2021-05-06 | Ashland | Al | Wellborn Cabinet Inc | Finger(s), fingernail(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was attempting to blow dust from a machine. The air hose got stuck in the machine and as the employee went to retrieve the hose from the machine the saw blade partially amputated their right middle finger. The entire finger was medically amputated. | |||||
2021-05-04 | Waverly | Ny | Rynone Manufacturing Corp | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was feeding stock through a table saw when their hand contacted the saw blade, resulting in an amputation of their left index finger above the middle knuckle. | |||||
2021-04-22 | Poplar Bluff | Mo | GATES CORPORATION | Fingertip(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was freeing a hose stuck in an in-line extruder. The extruder's saw blade amputated three fingertips on the employee's left hand. | |||||
2021-04-06 | Cincinnati | Oh | Rotex Global, LLC | Hand(s) | Struck against moving part of machinery or equipment |
An employee was using a cut-off saw when the saw blade amputated their left hand. | |||||
2021-04-05 | Webster | Ny | Studco Buillding Systems LLC | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting plywood using a table saw. The employee's left hand slipped and contacted the saw blade, resulting in a laceration to the index and middle fingers. | |||||
2021-04-01 | Houston | Tx | LMMM HOUSTON #31, LTD | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was using a bandsaw to cut pork ribs when his finger contacted the saw blade, resulting in a laceration to the left index finger. | |||||
2021-03-02 | Medina | Oh | Alberino Construction | Nonclassifiable | Struck against moving part of machinery or equipment |
An employee was using a table saw when they contacted the saw blade, resulting in a severe laceration. | |||||
2021-02-01 | Largo | Fl | Art Headquarters LLC | Hand(s) | Struck against moving part of machinery or equipment |
An employee was cutting wood molding on an industrial chop saw. He was using a piece of wood to push out another piece of wood when he felt dizzy and lost balance. He moved forward, pushing the foot pedal down, and the saw blade lacerated his left hand. | |||||
2021-01-24 | Sherman | Tx | Kaiser Aluminum & Fabricated Products, LLC | Finger(s), fingernail(s) | Caught in running equipment or machinery during maintenance, cleaning |
Two employees were preparing to change out a saw blade on a saw. The still moving belt pulled in one employee's right hand, crushing the knuckle of their index finger. | |||||
2020-10-01 | Lake Delton | Wi | Kalahari Manufacturing LLC | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting wood on a table saw when the wood kicked back and the employee's hand slipped, making contact with the saw blade. The left thumb was amputated at the knuckle. | |||||
2020-10-01 | Roundup | Mt | GEBHARDT POST PLANT & SAWMILL | Hand(s) | Caught in running equipment or machinery during regular operation |
An employee was feeding wood into a resaw when her glove was caught in the wood and her hand was pulled into the saw. The saw blades lacerated the knuckles of her left hand. | |||||
2020-09-11 | West Fargo | Nd | Corbon's, Inc. | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee of Corbon's, Inc., was using a bandsaw to cut meat when his hand slipped and made contact with the saw blade, resulting in the amputation of his left index finger at the first knuckle. | |||||
2020-09-10 | Waverly | Oh | Speyside Bourbon Stave Mill in Ohio at Waverly, Inc. | Finger(s), fingernail(s) | Struck against stationary object or equipment, n.e.c. |
An employee was trying to change a tooth on a saw blade. A pin on the tool the employee was using broke, and the employee's right middle finger came into contact with another tooth. The employee suffered an amputation affecting the side of the finger and the nail, with bone loss. | |||||
2020-09-09 | Osyka | Ms | Big 3 Pallets and Lumber | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting wood with a bandsaw. The saw blade lacerated the employee's right middle and ring fingers and fractured a middle joint and ligament. | |||||
2020-09-08 | Dallas | Tx | LMMM DALLAS #37, LTD | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was cutting meat with a bandsaw when his hands slipped and contacted the saw blade, resulting in a fingertip amputation. | |||||
2020-09-03 | Lavonia | Ga | Harbin Lumber Company, Inc. | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting a 4x4 section of lumber with a radial arm saw. The lumber kicked up and pushed her hand towards the saw blade. The employee sustained a laceration on the left pinky and middle fingers and injury to the left ring finger requiring amputation. | |||||
2020-08-31 | Oklahoma City | Ok | Insulation Distributors, Inc | Foot (feet) | Struck by dislodged flying object, particle |
Material was being loaded in a metal building laminating machine. The machine's saw blade came off, cutting an employee's foot. | |||||
2020-08-28 | Austell | Ga | Voith US Inc. | Fingertip(s) | Caught in running equipment or machinery during maintenance, cleaning |
An employee was using a band saw to cut a block of wood when the wood became jammed. As he attempted to unjam the wood, the saw blade amputated a quarter inch of his left thumb tip (no bone loss). | |||||
2020-08-25 | Dorchester | Wi | Pinters Packing Plant Inc. | Fingertip(s) | Struck against moving part of machinery or equipment |
On August 25, 2020, an employee was operating a vertical band saw to cut meat when the employee's right hand made contact with the energized saw blade, resulting in an amputation to the right thumb tip. | |||||
2020-08-19 | Punxsutawney | Pa | R & S Machine Company | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was sawing tubing on a horizontal band saw. He was brushing chips away from the saw blade when it amputated his left middle fingertip just behind the nail, also lacerating his ring finger. | |||||
2020-08-10 | Ridgewood | Ny | Julian A. McDermott, Corp. | Hand(s) | Contact with objects and equipment |
A saw blade lacerated the top of an employee's right hand. | |||||
2020-08-07 | Barrigada | Gu | COST U LESS | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was using a band saw to cut a beef shank when the shank became displaced after contacting the saw blade. The blade then amputated the employee's left middle finger. | |||||
2020-07-24 | Moultrie | Georgia | UFP Moultrie, LLC | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
While an employee was loading a board onto a chain, a saw blade lacerated his index, middle, and ring fingers. | |||||
2020-07-18 | Wellington | Kansas | Progressive Ag Coop | Arm(s) | Struck by object or equipment dropped by injured worker |
An employee was on the ground using a chain saw to cut a tree that was storm-damaged when he slipped and dropped the chain saw. He then fell on the saw blade, cutting his arm and requiring hospitalization and surgery. | |||||
2020-07-09 | Sutton | Massachusett | Unified2 Global Packaging Group, LLC | Forearm(s) | Caught in running equipment or machinery during regular operation |
An employee was cutting wooden sticks of lumber for a crating operation. When the radial arm saw retracted, it hung up on a small pile of debris. As he reached for a new piece of lumber to cut, the saw blade lacerated his forearm. | |||||
2020-06-25 | Eastlake | Ohio | CPP - Cleveland | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was cutting a gated part on a saw when a piece of the metal part broke off and caused the abrasive saw blade to grab/pull in the part. The employee's thumb tip was also pulled into the blade, amputating the tip upon impact. | |||||
2020-06-05 | Denver | Colorado | J&P Roofing | Finger(s), fingernail(s) | Injured by slipping or swinging object held by injured worker |
An employee was using a saw to cut metal roofing materials when he slipped and his left hand contacted the saw blade, resulting in full index, middle, and ring finger amputations. | |||||
2020-05-29 | Omaha | Nebraska | Greater Omaha Packing Company, Inc. | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was operating a saw when his hand slipped and his right pinky finger contacted the moving saw blade. He suffered an open fracture and partial amputation to his finger. | |||||
2020-05-27 | Newark | Ohio | Hope Timber Pallet & Recycling, LLC | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
On May 27, 2020, an employee was operating an automated trim saw. When the employee tried to remove a piece of wood, the saw blade caused an amputation to the employee's right thumb, index finger, and middle finger. | |||||
2020-05-20 | Houston | Texas | Kroger Texas, LP #128 | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was operating a meat saw. The saw blade flipped the piece of meat and sliced off the tip of the employee's right middle finger. | |||||
2020-05-14 | Brookville | Pennsylvania | Matson Lumber | Ankle(s) | Fall on same level, n.e.c. |
An employee was doing maintenance on a circular head saw blade splitter. The employee was straightening the splitter with an adjustable wrench and cheater pipe extension. The wrench slipped off the splitter, causing the employee to fall backwards onto a platform and suffer a dislocated/fractured right ankle. | |||||
2020-05-11 | Mckeesport | Pennsylvania | Ryco Inc. | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting a piece of Styrofoam on a table saw when his left hand came in contact with the table saw blade, cutting three fingers. | |||||
2020-05-01 | Elk Grove Village | Illinois | Chicagoland Home Products | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was operating an edge bander. The moving saw blade partially amputated the employee's little finger. | |||||
2020-04-29 | Cheektowaga | New York | Tops Markets, LLC | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was pressing meat into the glide toward the blade on a meat band saw when his left hand slipped and went into the saw blade. The employee suffered an amputation of the left pinky finger. | |||||
2020-04-15 | Sturgeon Bay | Wisconsin | DeLeers Construction Inc. | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was using a circular saw to cut a 2x4 when the saw blade came into contact with his right thumb, resulting in a thumb tip amputation. | |||||
2020-04-06 | Bainbridge | Georgia | Elberta Crate & Box Co. | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was removing a jammed stick from a band saw when the saw blade amputated the end of the employee's left index finger. | |||||
2020-03-31 | Janesville | Wisconsin | Gallina USA LLC | Fingertip(s) | Struck against moving part of machinery or equipment |
On March 31, 2020, an employee was cutting sheets of plastic on a table saw. The saw blade amputated the tip of the employee's right index finger. | |||||
2020-03-27 | Monongahela | Pennsylvania | DMI Companies | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was setting up a machine when a piece of steel caught his hand and pushed his pinky finger into a saw blade, resulting in an amputation of the left pinky fingertip. | |||||
2020-03-24 | Delair | New Jersey | Aluminum Shapes, LLC. | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting logs with a billet saw. The saw blade broke, causing amputations to the employee's left little, ring, and middle fingers. The employee was hospitalized. | |||||
2020-03-14 | Coolidge | Arizona | National Park Service | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
While an employee was cutting plywood using a table saw, the plywood bound up on the saw. When the wood suddenly became free, the employee's left hand contacted the saw blade. The employee sustained a partial amputation of the left index finger. | |||||
2020-03-10 | Berlin | New Jersey | JOHNS MANVILLE | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was clearing product from a conveyor belt and contacted a band saw blade resulting in a deep laceration to the left middle finger. | |||||
2020-03-04 | Randolph | Ohio | East Manufacturing Corporation | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting a piece of aluminum in the band saw when his left hand slipped and his left middle finger was partially amputated by the saw blade. | |||||
2020-03-03 | Boerne | Texas | Texas Timber Frames | Toes(s), toenail(s) | Struck against moving part of machinery or equipment |
An employee was operating a re-saw. While the employee was repositioning the "stop" on the saw, his foot contacted the saw blade. He sustained a laceration to a toe and tendon requiring surgery. The machine was running at the time. | |||||
2020-03-02 | Springfield | Missouri | VERMILLION HARDWOOD FLOORING | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was operating the groove side end matcher machine when the rotating saw blade contacted the employee's fingers resulting in partial amputation of the left thumb and index finger. | |||||
2020-02-29 | Salem | Ohio | FRESHMARK SALEM | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was emptying a tub of ham shank bones situated near a band saw and contacted the saw blade resulting in amputation of the left middle fingertip. | |||||
2020-02-25 | Ponca City | Oklahoma | Johnson Controls, Inc. | Fingertip(s) | Compressed or pinched by shifting objects or equipment |
An employee was changing the blades on a miter saw. A wood block was placed under the miter saw blades to hold the blades against the wood block. When the employee loosened the saw blade nut, the wood block slipped, and the saw blade came down and amputated their right middle fingertip. | |||||
2020-02-21 | Decatur | Texas | Poco Graphite, Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was operating a band saw and using a push stick. He placed material on the table and secured it with clamps. The material became jammed, so he moved to the other side and activated the saw blade. The saw blade caught the push stick and amputated his right index finger. | |||||
2020-02-20 | Dixfield | Maine | Irving Forest Products, Inc | Multiple pelvic region locations | Caught in running equipment or machinery during maintenance, cleaning |
A maintenance employee was conducting maintenance on the left side of a gang saw while other employees were changing a saw blade on the right side of the equipment. Once the saw blade was attached, the equipment began operating and the maintenance employee was caught in a pinch point, suffering injuries to the left hip and pelvis. | |||||
2020-02-06 | Cullman | Alabama | Simcoe Wood Products, Inc. | Finger(s), fingernail(s) | Caught in running equipment or machinery during regular operation |
An employee was cutting slat boards with a cut-off saw. The saw/guard control was activated while her right hand was under the pneumatic guard. The guard came down and the saw blade started and came up, amputating her right index, middle, and ring fingers and the tip of the little finger. | |||||
2020-01-31 | Montrose | New York | US Veterans Administration | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was using a table saw to cut plywood when the saw blade amputated the tip of his right thumb. | |||||
2020-01-24 | Hampshire | Illinois | BUCKHEAD MEAT COMPANY | Upper extremities | Caught in running equipment or machinery during regular operation |
An employee was cutting meat with a band saw when the employee's sleeve became caught, pulling the employee's arm into the saw blade and causing an amputation. | |||||
2020-01-23 | Carrollton | Texas | Western Industries Corporation | Finger(s), fingernail(s) | Caught in running equipment or machinery |
An employee was using a table saw to cut wood. While the employee was removing an object that was stuck in the saw, the saw caught the employee's glove and pulled the employee's hand into the saw blade. The employee suffered a finger amputation and crushing injuries. | |||||
2020-01-22 | Denver | Colorado | Denver Processing, LLC. | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting meat on a band saw when the saw blade cut the employee's right index and middle fingers, resulting in index and middle finger amputations. | |||||
2020-01-20 | Saint Petersburg | Florida | Design Works-General Contractors, L.L.C. | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting shams on a table saw when the employee's left hand made contact with the saw blade, lacerating four fingers. | |||||
2020-01-10 | Houston | Texas | Fiesta Mart, L.L.C. | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting meat with a band saw when his right middle finger contacted the saw blade, resulting in a soft tissue amputation to the finger. | |||||
2020-01-07 | Imler | Pennsylvania | Berkheimer's Construction & Landscaping, LLC | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was using a compound miter saw to cut a piece of pine when the saw blade contacted his left hand, resulting in an amputation to the thumb and index finger. | |||||
2019-09-18 | Franklin | Georgia | JAC Products, Inc. | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was changing the saw blade on a piece of machinery. A tool fell onto the machine, causing it to activate, and the blade amputated the employee's middle and ring fingers at the first knuckle. | |||||
2019-09-16 | Bartlett | Illinois | Senior Flexonics Inc. | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee's right hand contacted a moving band saw blade, resulting in a right index fingertip amputation. | |||||
2019-09-12 | Morton | Mississippi | Koch Foods | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was using a deboning saw to debone a poultry thigh when the employee's left index finger contacted the rotating saw blade, resulting in an amputation to the extreme end of the left index finger. Protective gloves were not worn at the time of the incident. | |||||
2019-09-09 | Poynette | Wisconsin | LeafGuard of Madison, LLC | Hand(s) | Struck against moving part of machinery or equipment |
An employee was using a chop saw to cut an aluminum gutter into smaller scrap pieces. The chop saw blade contacted his hand causing a cut that required surgery. | |||||
2019-09-05 | Clayton | Ohio | FCA, LLC | Wrist(s) | Struck against moving part of machinery or equipment |
An employee had been cutting wood on a saw machine. While removing debris, the saw blade caused a severe laceration to the employee's wrist. | |||||
2019-08-22 | Fort Bragg | North Caroli | US Dept of Army | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was learning to operate a table saw and was cutting a wooden 2x4 when the employee's left hand contacted the saw blade, resulting in a left index finger amputation. | |||||
2019-08-21 | Tulsa | Oklahoma | REASOR'S LLC | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was cutting a block of meat using a bandsaw. The saw blade cut his right little finger; the tip was medically amputated. | |||||
2019-08-20 | Tifton | Georgia | Kelley Manufacturing Co. | Hand(s) and finger(s) | Caught in running equipment or machinery during regular operation |
An employee was cutting 1/2 inch round metal rod into 4-inch pieces using a horizontal band saw. As the employee removed a piece the glove on his left hand was caught pulling his hand into the blade. Part of his left hand and two fingers were amputated by the saw blade. | |||||
2019-08-20 | Hudson | Ohio | Ramco Specialties, Inc. | Fingertip(s) | Caught in running equipment or machinery during regular operation |
An employee was using a rag to wipe off oil on a part that was being cut by a horizontal band saw. The saw blade caught the rag and pulled the employee's hand into the saw, resulting in a partial amputation of his right fifth fingertip. | |||||
2019-08-20 | Maumee | Ohio | THE ANDERSONS, INC. | Leg(s) | Struck by dislodged flying object, particle |
An employee was cutting a piece of metal with a saw when the saw blade broke and lacerated his leg, requiring stitches. | |||||
2019-08-19 | Sheboygan | Wisconsin | Watry Industries LLC | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was using a band saw to cut gating off of a part when the employee contacted the saw blade, resulting in an amputation to the right middle fingertip. | |||||
2019-08-19 | Austin | Texas | HRT Construction Inc. | Wrist(s) | Injured by slipping or swinging object held by injured worker |
An employee cut his left wrist using unguarded grinder with a saw blade. | |||||
2019-08-12 | Barberton | Ohio | CHEMICAL & MECHANICAL CONTRACTORS, INC. | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was operating a table saw when the employee's left thumb contacted the saw blade, resulting in a left thumb tip amputation. | |||||
2019-08-08 | Dorchester | Massachusett | Emcor Services Northeast | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was using a band saw to cut a piece of copper pipe when the employee's left finger contacted the saw blade, resulting in a finger amputation. | |||||
2019-07-29 | Columbus | Ohio | Pressure Connections Corporation | Hand(s) | Struck against moving part of machinery or equipment |
On July 29, 2019, an employee was cutting a hydraulic hose with a cutting saw when the employee's left hand contacted the saw blade and was cut. The saw blade was unguarded at the time of the incident. | |||||
2019-07-24 | Southaven | Mississippi | Stepherson, Inc. | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was using a bandsaw to cut beef when the left index finger contacted the bandsaw blade, amputating the fingertip above the first knuckle. | |||||
2019-07-24 | Ruston | Louisiana | Quality Truss of Texas LLC | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was cutting lumber with a pull saw. He had accumulated some scrap lumber underneath the blade. He turned the saw off and proceeded to clean under the saw blade and guard when his hand hit the blade, lacerating his left thumb and index finger. The blade had not come to a complete stop at the time of the incident. | |||||
2019-07-17 | Tampa | Florida | Residential Acoustics LLC | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was manufacturing acoustic panels with fiberglass products. The employee was cutting a panel with a table saw when his right pinky finger contacted the saw blade. The finger was amputated below the second knuckle, and was later reattached. | |||||
2019-07-17 | Mount Pleasant | Texas | Brookshire Grocery Company | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was using a meat band saw to cut some pork when his hand slipped and went into the saw blade, resulting in a right thumb amputation. | |||||
2019-07-15 | Hazleton | Pennsylvania | USA Pork Packers Inc | Fingertip(s) | Caught in running equipment or machinery during regular operation |
On July 15, 2019, at approximately 5:15 PM, an employee was cutting meat on a bandsaw. The employee's glove got caught on the bandsaw blade and pulled his left thumb into the blade resulting in the amputation of the thumb tip. | |||||
2019-07-10 | Saint Louis | Missouri | Warehouse of Fixtures, TNG | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was cutting a piece of wood with a table saw. The wood jerked and caused his hand to slip and contact the saw blade. The tip of his pinky finger was amputated below the fingernail, and two other fingers were cut. | |||||
2019-07-03 | Deer Park | Texas | Lewis Food Town Inc. | Fingertip(s) | Struck against moving part of machinery or equipment |
An employee was cutting a top round steak at 1/8 inch, at a customer's request. His hand slipped and contacted the saw blade partially amputating the left middle fingertip. The blade was not guarded at the time. | |||||
2019-06-26 | San Antonio | Texas | Universal Forest Products, LLC | Finger(s), fingernail(s) | Struck against moving part of machinery or equipment |
An employee was attempting to align the chain and dog ears of a component cyber saw when the spinning saw blade flicked his hand towards the blade teeth, causing an injury that resulted in a thumb amputation. The saw was locked out at the time. |